This guide provides a step-by-step procedure for performing an ECG test using Norav ECG with LEMR integration to Best Practice (Bp Premier). The Norav ECG software is compatible with Norav PC-ECG 1200 USB Resting ECG devices.
The instructions below are designed for LEMR version 2023.10.9.1642 and later. If instructions for earlier versions are required, please contact LEMR Support.
¶
Start Test
1. Open the patient’s file in Best Practice (Bp Premier).
2. Make sure your ECG device is plugged in to your computer.
3. Make sure the patient’s height and weight information is up to date.
4. Go to the Utilities menu and select Electrocardiogram.
5. Choose a specific LEMR Client computer to start the test on.
6. While the test is in progress, a window will be displayed over Best Practice. LEMR Client will pop up over the top.
Are you stuck on this test in progress window? If so, please click here for help troubleshooting this issue.
7. LEMR Client will pop up asking to start a test – select Norav ECG to start the test.
Note: it is recommended to connect all patient electrode leads to your patient before starting the test.
8. The Norav Resting ECG software will now open. If the ECG device is properly connected, live data will appear on the screen from the device.
Ensure all patient electrode leads are properly connected so you receive a good quality trace.
If you are having trouble getting a good reading, please review this ECG electrode troubleshooting guide
9. Wait until at least 10 seconds of good ECG data has been received, then click on STOP.
10. If the ECG looks acceptable on screen, click EXIT to close the Norav Resting ECG software.
11. When the LEMR Client window pops up, the test should be made ready for Best Practice to collect - the test icon will go from an uploading icon to a circled tick.
12. LEMR Server will detect the finished test and automatically import it into Best Practice. The imported test will be stored in Clinical Images. Click OK.
