The following information can help you to connect the cables ready for capturing an ECG using your Amedtec CardioPart 12 device. For assistance with Bluetooth connections (for the CardioPart 12 Blue version of the ECG), please visit this article here.
¶ Amedtec CardioPart 12 - Patient Cable Connection
The patient cable connects to the device as follows. Gently connect the cable around the correct way in the device (it can only plug in one way, though it is important to avoid damaging te pins in the cable or the socket on the ECG device.
The thumb screws can then be tightened to stop the patient cable from coming apart/losing connection. Do not over tighten these thumb screw as it is not necessary to do so and may damage the thread.
If you need to remove or replace the patient cable, simply do the reverse; undo the two thumb screws and gently pull to remove the cable from the device.
¶ Amedtec CardioPart 12 - USB Cable Connection
The USB end can then plug in to your computer.
Need Help?
LEMR customers can get help by contacting LEMR Support.