This guide provides a step-by-step procedure for performing an ECG test using Norav ECG with LEMR integration to Zedmed Clinical. The Norav ECG software is compatible with Norav PC-ECG 1200 USB Resting ECG devices.
The instructions below are designed for LEMR version 2023.10.9.1642 and later. If instructions for earlier versions are required, please contact LEMR Support.
2. Make sure your ECG device is plugged in to your computer.
3. Click on the LEMR icon with the patient's name next to it.
4. Click on ECG.
5. Choose a specific LEMR Client computer to start the test on.
6. While the test is in progress, a window will be displayed over Zedmed. LEMR Client will pop up over the top.
7. LEMR Client will pop up asking to start a test – select Norav ECG to start the test. Note: it is recommended to connect all patient electrode leads to your patient before starting the test.
Note: If LEMR Client does not appear, click on the LEMR Client icon at the bottom of the screen or open LEMR Client from the desktop icon.
Then click on Sync Now at the lower left side of the LEMR Client window.
8. The Norav Resting ECG software will now open. If the ECG device is properly connected, live data will appear on the screen from the device. Ensure all patient electrode leads are properly connected so you receive a good quality trace.
9. Wait until at least 10 seconds of good ECG data has been received, then click on STOP.
10. If the ECG looks acceptable on screen, click EXIT to close the Norav Resting ECG software.
11. When the LEMR Client window pops up, the test should be made ready for Zedmed to collect - the test icon will go from an uploading icon to a circled tick.
12. LEMR Server will detect the finished test and automatically import it into Zedmed Clinical. The imported test will be stored in Images/ECG. Click OK.
