This guide provides a step-by-step procedure for performing a Forced Vital Capacity (FVC) test using Vyaire CareFusion Spirometry PC Software with LEMR integration to Zedmed Clinical. Spirometry PC Software is compatible with Vyaire Medical CareFusion Microlab and USB PC-based spirometers.
The instructions below are designed for LEMR version 2023.10.9.1642 and later. If instructions for earlier versions are required, please contact LEMR Support.
2. Click on the LEMR icon with the patient's name next to it.
3. Click on Spirometry.
4. Choose a specific LEMR Client computer to start the test on.
5. While the test is in progress, a window will be displayed over Zedmed. LEMR Client will pop up over the top.
6. Ensure the Spirometer and the USB Hardware Key are plugged into the computer.
7. LEMR Client will pop up asking to start a test – select SPCS to start the test.
Note: If LEMR Client does not appear, click on the LEMR Client icon at the bottom of the screen or open LEMR Client from the desktop icon.
Then click on Sync Now at the lower left side of the LEMR Client window.
8. Vyaire CareFusion Spirometry PC Software will now open. It may ask if you would like to perform a calibration verification. To bypass this step, click No.
Note: Daily calibration verification may be required to be compliant with regional guidelines. Instructions for performing calibration verification can be found in the Help menu in the CareFusion application.
9. Ensure the details are correct then click on Forced Base to start a Forced Vital Capaticity (FVC) Pre Test.
10. Follow the instructions on screen to perform the first Pre Test. The National Asthma Council has a great video to demonstrate how a patient performs a Spirometry test here.
11. Click on Accept + Next and repeat the testing procedure. Repeat until at least 3 Pre Tests have been completed. When the repeatability criteria has been met, click on Accept + Done.
If this is a pre-only session (e.g. a pre-employment medical) skip to Finish Study
If bronchodilator is required, patient must wait 10–15 minutes then continue to Post Test
If you need to finish the study now, follow the steps to Finish Study then LEMR will upload the report as it is now to Zedmed. This could be for pre-employment medicals, to do other things in Zedmed or test another patient while waiting for the bronchodilator to work, etc.
Later, during the same day, you can resume a Spirometry session to add more tests (such as post tests).
To do this, simply start another Spirometry test from Zedmed on the same computer you had used earlier. LEMR Client will then offer to resume the study then go to Post Test.
13. CareFusion may ask you if you would like to perform a calibration verification. To bypass this step, click No.
Note: Daily calibration verification may be required to be compliant with regional guidelines. Instructions for performing calibration verification can be found in the Help menu in the CareFusion application.
14. Note in the text field any medication that was used, then click Forced Post 1 to start a Forced Vital Capaticity (FVC) Post Test.
15. Follow the instructions on screen to perform the first Post Test.
16. Click on Accept + Next and repeat the testing procedure. Repeat until at least 3 Post Tests have been completed. When the repeatability criteria has been met, click on Accept + Done.
18. When the LEMR Client window pops up, the test should be made ready for Zedmed to collect - the test icon will go from an uploading icon to a circled tick.
19. LEMR Server will detect the finished test and automatically import it into Zedmed. The imported test will be stored in Images/ECG. Click OK.
