This guide provides a step-by-step procedure for performing an ABPM test using Amedtec ECGpro with LEMR integration to Zedmed Clinical. ECGpro is only compatible with Amedtec branded ABPM devices.
If you have already programmed the recorder, and the patient has come back to import the results from the device, go to the Download Data from the Recorder section. Otherwise, always start at the Program the Recorder section below.
The instructions below are designed for LEMR version 2023.10.9.1642 and later. If instructions for earlier versions are required, please contact LEMR Support.
2. Click on the LEMR icon with the patient's name next to it.
3. Click on ABPM.
4. Choose a specific LEMR Client computer to start the test on.
5. While the test is in progress, a window will be displayed over Zedmed. LEMR Client will pop up over the top.
6. LEMR Client should then ask if you would like to start the scheduled test. Choose ECGpro.
Note: If LEMR Client does not appear, click on the LEMR Client icon at the bottom of the screen or open LEMR Client from the desktop icon.
Then click on Sync Now at the lower left side of the LEMR Client window.
7. On-screen instructions to connect your AMEDTEC ABPM (Holter-RR) device to your computer will appear on the screen. Start by connecting the round plug into the side of the ABPM device.
WARNING - Be gentle with the round plug on the side; the small pins inside can easily be damaged!
Line the two red dots up before pushing the cable into the socket. Gently push it directly in until there is a satisfying click sound and it locks into place – do not rotate the plug!
8.Turn on the AMEDTEC ABPM (Holter-RR) by pressing the red power button. You should see “co” on the screen of the device indicating that it is connected. A device found message should appear then ECGPro will open.
9. Click on Prepare Recorder.
10. Adjust the day/night time intervals as required and click Transmit, and activate the selected protocol.
Note: If you are asked to clear the memory of the device, please be sure that you have already downloaded the data on the recorder before clicking yes.
11. The ABPM Programming Finished window will appear. Review the message on screen then click OK.
12. Disconnect your AMEDTEC ABPM (Holter-RR) device from your computer, place the ABPM cuff on the patient and the recorder into the pouch.
Follow the instructions printed on the cuff for placement. The pressure tube must go up and over the shoulder. Also make sure the cuff is 2 to 3cm from the arm joint. Also make sure you can fit two fingers between the cuff and the patient’s arm.
13. Press the Play button on the recorder to start the first test – the automatic schedule will begin after this first manual test is complete.
Follow this procedure when the patient returns after 24 hours of testing.
1. In Zedmed Clinical, open the patient’s file where the ABPM report will be imported.
2. Click on the LEMR icon with the patient's name next to it.
3. Click on ABPM.
4. Choose a specific LEMR Client computer to import the test on and click OK.
5. While the test is in progress, a window will be displayed over Zedmed. LEMR Client will pop up over the top.
6. LEMR Client should appear asking if you would like to start the scheduled test. Choose ECGpro.
Note: If LEMR Client does not appear, click on the LEMR Client icon at the bottom of the screen or open LEMR Client from the desktop icon.
Then click on Sync Now at the lower left side of the LEMR Client window.
7. On-screen instructions to connect your AMEDTEC ABPM (Holter-RR) device to your computer will appear on the screen. Start by connecting the round plug into the side of the ABPM device.
WARNING - Be gentle with the round plug on the side; the small pins inside can easily be damaged!
Line the two red dots up before pushing the cable into the socket. Gently push it directly in until there is a satisfying click sound and it locks into place – do not rotate the plug!
8.Turn on the AMEDTEC ABPM (Holter-RR) by pressing the red power button. You should see “co” on the screen of the device indicating that it is connected. A device found message should appear then ECGPro will open.
9. In the AMEDTEC software, click on Download Recording.
10. Click on the big button with the patient’s name on it – there should only be one to click on, contact support if there are two items in the list.
11. Click either Review recording, Print recording or Exit as required.
12. When the LEMR Client window pops up, the test should be made ready for Zedmed to collect - the test icon will go from an uploading icon to a circled tick.
13. LEMR Server will detect the finished test and automatically import it into Zedmed Clinical. The imported test will be stored in Images/ECG. Click OK.
